Time to relax to the max!
And I’m sure there is no better way than with a glass of wine and a bubble bath.
Here I’ll show you how I made my bath caddy with a wine glass holder.
First I like to give you a tip, that I only noticed afterwords.
~ Make sure to check if your bathtub widens on the side.
So you know exactly were to put the bottom planks.
( Our bathtub is wider where the overflow is. )
Here you go!!
Things you will need:
- Wooden board.
- 2 smaller planks for the bottom.
- A Drill with a hole saw peace for the wine glass holder.
- Jig saw
- Water resistant Sealer
- Wood glue
- Claps
I first sanded my wood board and 2 smaller boards.
I marked were I wanted the wine glass holder.
Use the Drill with the hole saw (Ø 51mm) and drill the hole.
With the Jig saw, saw a gap wide enough for your wine glass to enter the hole.
Sand if needed.
Mark where the bottom planks should be. You need them there so the caddy won’t move side to side and fall into the bath.
And then you wont have any wine left.
And that’s sad.
Use the wood glue and some claps to clue the 2 smaller boards on.
And use a Water resistant Sealer to seal the Caddy.
.
.
.
.
Relax and enjoy your next bath!
Feel free to ask me any questions!
Farm Adventures 